Omega RD200 Manual de usuario descargar pdf (Pagina 124)

－１２０－

21. MAINTENANCE

21.2 Cleaning and Lubrication

Clean the main shaft of each pen once a year in order to maintain a satisfactory printing performance.

Plotter pen Cartridge pen (RD200) Cartridge pen (RD2800)

1 Main Shaft of Plotter Pen

(1) Turn off printing. Pull out the chart cassette and

open the display section.

(2) Wipe off dirt from the main shaft with a cotton

bud or similar tool. (Dirt can be wiped off more

easily with a cotton bud soaked in alcohol.)

(3) Apply one or two drops of the provided

lubricating oil to the main shaft.

2 Main Shaft of Cartridge Pen

(1) Turn off printing. Pull out the chart cassette and

open the display section.

(2) Wipe off dirt from the main shaft with a cotton

bud or similar tool.

(3) Apply one or two drops of the provided

lubricating oil to the main shaft.

(1) Do not move the plotter pen or cartridge pen by hand.

(2) Use the provided lubricating oil. Do not use any other oil.

3 Cleaning the Door

The door is made of plastic*. Clean it with a dry soft cloth or with a soft cloth moistened with lukewarm water or a

neutral detergent.

* Aluminum die-cast door is available an option. (RD200)

Do not use thinner, benzene or other chemicals that may damage the plastic components. These may

cause deformation or breakage to the door.

Caution on cleanin

and lubrication

Remarks

Do not use any chemicals

Main shaft

Caution

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 133 134

Sin comentarios

Omega RD200 Manual de usuario Pagina 124